2 Outlet Power Board | Flush Mount | Black | Plug & Play GPO | AllSpark

Scan the QR code to download the free Camping Australia app - 5,000+ campsites and 1,100+ free camps in your pocket

2 Outlet Power Board | Flush Mount | Black | Plug & Play GPO | AllSpark

$89.00

A two-outlet 230V power board in a black flush-mount plate — mains outlets built into a caravan wall or canopy rather than an extension lead run across the floor. Each outlet has its own switch, and the whole unit is protected by a 10A push-button resettable circuit breaker.

It is fed through an IEC 14 inlet on the body, with a 2m IEC 13 right-angle cord supplied. Important: this is not a residual current device (RCD) and does not replace one — install it downstream of the RCD protection in your 240V system.

Features

+

2 × 230–240V outlets with individual switches
10A max / 2400W max for the whole unit
10A push-button resettable circuit breaker
IEC 14 10A inlet on the body
Supplied with a 2m IEC 13 10A right-angle cord
Front plate 100 × 100mm, securing ring 115mm diameter, body depth 56mm (75mm including cord)
Important: this is not a residual current device (RCD) and does not replace one
12 months warranty

Specifications

+

Power	10A max / 2400W max
Voltage	230–240V @ 50Hz
Over-current protection	10A push-button resettable circuit breaker
Input socket	IEC 14 10A socket on body
Power cord	IEC 13 10A right-angle, 2m
Front plate	100 × 100mm
Securing ring	115mm diameter
Body depth	56mm (75mm inc. cord)
Colour	Black
Warranty	12 months

Shipping & Returns

+

Shipping

Outdoor Camping Australia operates a nationwide distribution network, with items shipping from:

Our warehouse in Bendigo, Victoria
Partner supplier warehouses on the East Coast
Partner supplier warehouses on the West Coast

This multi-location approach allows us to provide efficient delivery across Australia. Use our shipping calculator on the product pages for accurate delivery times and costs to your location.

Important Shipping Notes:

We cannot deliver to PO Boxes, Private Mail Bags or Parcel Lockers
Depot pickup options may be available at reduced rates (contact us to discuss)
Off-mainland deliveries require additional shipping fees (custom quoted)
Missed deliveries may incur a redelivery fee set by the courier
All shipments managed through our trusted delivery partners including Border Express, VicTas, DHL, StarTrack, AusPost, Sendle and Aramex

Returns

As outlined in our Refund Policy, we follow the Australian Consumer Law (ACL) which protects consumers by providing certain guaranteed rights when buying goods and services.

You can return items if:

The product is faulty or not of merchantable quality
The product is not fit for its intended purpose
The product does not match the description
You can present proof of purchase

For change of mind returns:

Item must be in original condition with tags attached
Must be returned within 30 days of purchase
Original proof of purchase required
Return shipping is at customer's expense
Original delivery charges are non-refundable unless due to our error

Refunds will be processed within 10 business days of receiving and inspecting the return.

For full details, please refer to our:

Warranty Details

+

12-month manufacturer warranty against defects in materials and workmanship.

Common questions about 2 Outlet Power Board | Flush Mount | Black | Plug & Play GPO | AllSpark

Can I run a kettle and a heater off it?

Not at the same time. The whole unit tops out at 10A and 2400W across both outlets, and a single kettle or heater will use most of that on its own. Run them one after the other. The push-button breaker trips rather than letting you cook the wiring, and resets with a press.

Does fitting it need an electrician?

The mains side is plug and play, since the cord ends in an IEC plug rather than bare conductors, so you are not joining 240V wiring yourself. The physical side is on you: the plate needs a matching hole cut and clear space behind it. Actual mains work still belongs to a licensed sparky.

Why does it say it is not an RCD?

Because people assume a breaker is the same thing, and it is not. The built-in breaker protects the wiring from an overload. An RCD protects the person holding the appliance. Install this downstream of the RCD protection already in your 240V system and you have both jobs covered.