Auto & Marine Carpet Charcoal/Grey x 1X Long x 2M Wide

Scan the QR code to download the free Camping Australia app - 5,000+ campsites and 1,100+ free camps in your pocket

Auto & Marine Carpet Charcoal/Grey x 1X Long x 2M Wide

$70.00

The Offroad Living Auto & Marine Carpet in Charcoal/Grey is a heavy-duty needle-punch polypropylene carpet engineered specifically for the tough demands of Australian automotive, marine, and caravan interior fitouts. Supplied in a generous 2-metre-wide roll (1 linear metre per unit), it offers excellent coverage with minimal joins, making it ideal for neatly finishing larger surfaces in one pass. The tightly woven needle-punch construction delivers a durable, low-pile surface that resists fraying at cut edges, holds adhesive evenly, and stands up to the constant foot traffic, UV exposure, and moisture that come with life on the road.

This versatile carpet is the go-to choice for Australian caravanners, 4WD and camper-trailer owners, and boating enthusiasts looking to refresh or customise their vehicle's interior. Use it to line the floor, walls, or boot area of your caravan, motorhome, or camper; finish the deck and storage compartments of a tinnie or fibreglass boat; or carpet the load bay of your 4WD, ute tray, or canopy. The neutral charcoal/grey colourway complements virtually any interior scheme and conceals road dirt and dust—a practical advantage when you're exploring Australia's red outback tracks or coastal sand trails.

Key Features

Heavy-duty needle-punch polypropylene construction for durability and fraying resistance
2m-wide roll minimises joins for a clean, professional finish over large surfaces
Water- and moisture-resistant fibres — ideal for marine, caravan, and outdoor use
Neutral charcoal/grey colourway suits any interior and hides road dust and dirt
Easy to cut and bond — compatible with most contact adhesives and carpet tapes

Features

+

Heavy-duty needle-punch polypropylene pile construction resists wear and fraying
2-metre roll width minimises seams and joins for a neat, professional interior finish
Supplied as 1 linear metre x 2m wide — providing 2m² of carpet per unit
Water-resistant and moisture-tolerant fibres suitable for marine and outdoor environments
UV-stabilised fibres retain colour and integrity in Australian sun conditions
Neutral charcoal/grey tone conceals dust, dirt, and stains from off-road adventures
Bonds cleanly with standard contact adhesive or double-sided carpet tape
Suitable for caravan floors, camper walls, boat decks, 4WD load bays, and ute canopies
Low-pile surface is easy to clean — sweep, vacuum, or wipe with a damp cloth
Versatile fitout material compatible with timber, fibreglass, aluminium, and plywood substrates

Specifications

+

Brand	Off Road Living
SKU	CARPETCHARCOALLM
Colour	Charcoal / Grey
Roll Width	2000 mm (2 m)
Roll Length (per unit)	1000 mm (1 linear metre)
Coverage per Unit	2 m²
Pile Type	Needle-punch (low pile)
Material	Polypropylene (PP)
Backing	Woven hessian / synthetic backing
Water Resistance	Water-resistant — suitable for marine and outdoor environments
Adhesive Compatibility	Contact adhesive or double-sided carpet tape
Suitable Substrates	Timber, plywood, fibreglass, aluminium, and steel
Applications	Caravan, motorhome, boat, 4WD, ute tray, camper trailer, canopy
Country of Origin	Australia / Imported

Warranty Details

+

12-month manufacturer warranty against defects in materials and workmanship.

Download Manual PDF

Common questions about Auto & Marine Carpet Charcoal/Grey x 1X Long x 2M Wide

Will it hold up on a boat floor that gets wet?

Polypropylene fibre does not rot or absorb much, so it handles wet feet and spray fine. What fails is the glue line underneath if water sits between carpet and floor. Bed it on a dry, clean substrate and give the deck somewhere to drain.

Can I lay this over an existing floor without pulling the old one up?

Only if the old surface is sound and flat. Needle-punch is low pile, so it follows what is underneath rather than hiding it — lumps, old adhesive ridges and soft spots all show through. Scrape it back to bare board or ply first.

How do I stop the cut edges fraying?

Cut from the back with a sharp blade against a straight edge and it holds together well, but any edge that gets handled wants wrapping around the panel and glued on the underside. Where you cannot wrap, an alloy trim strip finishes it cleanly.