Questions? for expert advice, or read our buying guides
Key features
- 4 B&S (approx. 4 AWG) single core battery and starter cable
- 135 A current rating at 30°C, with JASO D609 de-rating factors applying
- Oxygen-free plain copper conductor for efficient current flow
- 252 strands of 0.32 mm copper for a flexible, easy-to-route cable
- Low electrical resistance of 0.9 ohm/km at 20°C to help limit voltage drop
- V90 PVC insulation to AS/NZS 3808, 1.1 mm thick, for heat and abrasion resistance
- Compact 8.3 mm outer diameter suits standard 4 B&S / 4 gauge lugs
- Suitable for 12V and 24V DC systems in caravans, 4WDs, camper trailers and motorhomes
- Black insulation for the negative side of battery, charger and inverter wiring
- Sold per metre for custom-length runs with no wasted off-cuts
Overview
Tycab 4 B&S black single core battery cable is built to move serious current around your rig without the voltage drop. With a 20.26 mm² oxygen-free copper conductor made up of 252 strands of 0.32 mm wire, it is rated to 135 A at 30°C and has a low resistance of just 0.9 ohm/km. That makes it a dependable choice for the heavy 12V and 24V runs in a caravan, camper trailer or 4WD, where every bit of lost voltage counts.
The fine-strand copper stays flexible enough to route through engine bays, ute canopies, chassis rails and caravan battery compartments, while the 1.1 mm V90 PVC insulation to AS/NZS 3808 stands up to heat, abrasion and corrugated Australian roads. Use it for dual battery systems, DC-DC chargers, inverter feeds, winch leads and auxiliary battery banks, and order by the metre so you buy exactly the length your motorhome, RV or off-road build needs. Black insulation is typically used for the negative side, so pair it with red cable for clear polarity.
Key Features
- 135 A current rating at 30°C (JASO D609 de-rating applies) for demanding 12V and 24V circuits
- 20.26 mm² oxygen-free copper conductor with 252 x 0.32 mm strands for low resistance and flexibility
- V90 PVC insulation to AS/NZS 3808, 1.1 mm thick, for heat and abrasion protection
- Suits dual battery, DC-DC charger, inverter and winch wiring in caravans, 4WDs and camper trailers
- Sold per metre so you buy exactly the length your install needs
Delivery, returns & warranty
Shipping & Returns
Shipping
Outdoor Camping Australia operates a nationwide distribution network, with items shipping from:
- Our warehouse in Bendigo, Victoria
- Partner supplier warehouses on the East Coast
- Partner supplier warehouses on the West Coast
This multi-location approach allows us to provide efficient delivery across Australia. Use our shipping calculator on the product pages for accurate delivery times and costs to your location.
Important Shipping Notes:
- We cannot deliver to PO Boxes, Private Mail Bags or Parcel Lockers
- Depot pickup options may be available at reduced rates (contact us to discuss)
- Off-mainland deliveries require additional shipping fees (custom quoted)
- Missed deliveries may incur a redelivery fee set by the courier
- All shipments managed through our trusted delivery partners including Border Express, VicTas, DHL, StarTrack, AusPost, Sendle and Aramex
Returns
As outlined in our Refund Policy, we follow the Australian Consumer Law (ACL) which protects consumers by providing certain guaranteed rights when buying goods and services.
You can return items if:
- The product is faulty or not of merchantable quality
- The product is not fit for its intended purpose
- The product does not match the description
- You can present proof of purchase
For change of mind returns:
- Item must be in original condition with tags attached
- Must be returned within 30 days of purchase
- Original proof of purchase required
- Return shipping is at customer's expense
- Original delivery charges are non-refundable unless due to our error
Refunds will be processed within 10 business days of receiving and inspecting the return.
For full details, please refer to our:
Warranty Details
+
Warranty Details
+
- Manufacturer warranty against defects in materials and workmanship.
Customer reviews
No reviews for the 4B&S Single Core Black Battery Cable yet. Be the first.
Specifications
| Brand | Tycab |
|---|---|
| Cable type | 4 B&S single core battery / starter cable |
| Colour | Black |
| Nominal conductor area | 20.26 mm² |
| Nearest AWG | 4 AWG |
| Conductor material | Oxygen-free plain copper |
| Strand count / size | 252 x 0.32 mm |
| Current rating | 135 A at 30°C (JASO D609 de-rating applies) |
| Electrical resistance at 20°C | 0.9 ohm/km |
| Insulation | V90 PVC to AS/NZS 3808 |
| Insulation thickness | 1.1 mm |
| Nominal outer diameter | 8.3 mm |
| Weight | Approx. 22.4 kg per 100 m (0.224 kg per metre) |
| Voltage rating | 12V / 24V DC systems (not for mains connection) |
| Sales unit | Sold per metre |
| Relevant standards | AS/NZS 3808, AS/NZS 1125, AS/NZS 1574, SAE J1127 |
| Tycab product code | ABC128703 |
-
TycabTycab 0 B&S Single Core Black Battery Cable
$32.00
-
Tycab0B&S Single Core Red Battery Cable
$32.00
-
Offroad LivingAuto & Marine Carpet Charcoal/Grey x 1X Long x 2M Wide
$70.00
-
Offroad LivingAuto & Marine Carpet Black x 1X Long x 2M wide
$70.00
-
TesaTESA HARNESS TAPE 19MM X 25M – 1 ROLL PER PACK
$20.00
-
Offroad LivingBlack PVC Electrical tape
$15.00
-
Offroad LivingSnap Bushing 32mm - Cable pass through - 5 Pack
$3.25
-
Offroad LivingSnap Bushing 25mm - Cable pass through - 5 PACK
$3.00
Where will you use it?
Campsites near you from Campsite Explorer, our free trip planner.