The new line of Suburban RV water heaters is the best on the road today! Their high recovery gas and gas-electric models come in sizes and with features to match the requirements of almost any RV. Its high tensile steel tanks are porcelain-lined and pressure tested twice during the manufacturing process, ensuring tank integrity and reliability. Automatic models in the Suburban range feature direct spark ignition with a remote switch that electronically controls the water heater from inside your RV - a simple convenience, especially in poor weather conditions. Don’t allow your water heater to let you down whilst travelling, ask your RV Dealer to install a longer lasting, robust and intelligent Suburban RV water heater today!.
Fast recovery means more hot water and fewer cool water cycles. Suburban uses a copolymer insulation jacket specially moulded to fit the tank which does a better job of retaining heat than some other models.
All Suburban water heaters are designed for easy installation, operation and maintenance. The limit switch, reset button and on/off electric element rocker switch are conveniently located in a housing behind the removable outer door. The electric heat element and combination drain plug/anode rod are also located there.
Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an anode rod to “absorb” the electrolytic action - just like your water heater at home.
Suburban Water Heaters carry the following approvals: WaterMark Certification Australia and New Zealand Gas Safety Certification Regulatory Compliance Mark (RCM)
- Capacity: 15.1L
- Maximum Working Pressure: 700kPa
- Hourly Gas Consumption: 8.7 mj/hour
- Test Point Pressure: 2.63Kpa
- Jet Orifice Size: 0.84mm
- Type Of Heating Medium: 240V
- Recovery: 21Lhr 45°C Rise
- For Automatic Gas Ignitor: 12Volt D.C 240 Volt Heating Element: 240Volt – 50HZ A.C. Element Rating: 1440 Watts – 6 Amp
- Width: 320mm
- Height: 320mm
- Depth: 450mm